This christmas I offered myself an htc magic from Portuguese provider TMN.
This came with a “perfect” SPL 1.33.0014.
After a few hours searching I ended up using the goldcard method to flash it up.
I followed http://vivekgolecha.blogspot.com/2009/08/as-promised-i-said-i-would-come-up-with.html but with some changes.
I 1. no need to download the fastboot as it comes by default with the new sdk
II 1. I used a sandisk 1gb without a problem.
II 12. i quick formated the sd card to fat32 on my computer on this step (not sure if it was needed)
II 13. choose the “removable disk” from the bottom option and NOT the top eg:”Untitled Disk (F:)” – I almost gave up here. So simple and was my main problem.
III 1. Used “ROM v2.53.707.2 (Engineerings SPL v1.33.2010)” as you cannot downgrade spl for me this was the only option
III 29. My sdcard was causing some media error. I took it out and without it no problem. I ended up formating it using the phone and it re-started working fine.
And thats all you need to change spl.
After that I followed this tutorial http://forum.pplware.com/showthread.php?tid=4043&page=1 (Portuguese) my recovery page looked and gave me some diferent options, but it was common sense.
Its working fine. Faster and without any errors or bugs. so far 🙂
6 replies on “htc magic flash perfect spl – android”
olá tentei fazer o tutorial mas estou com um problema no passo 4 do gold card aparece-me
cat /sys/class/mmc_host/mmc1/mmc1:*/cid
cat /sys/class/mmc_host/mmc1/mmc1:*/cid: not found
tenho as drivers instaladas pois não me da erro nenhum quando faço adb devices dame o serial tudo ok.. o depuramento usb esta seleccionado não sei o que se passa podes-me ajudar? cumprimentos
Boas Carlos:
Se de facto conseguiste fazer o unmount e formatar o cartão COM SUCESSO então não vejo que possa estar a acontecer.
A mim as drivers estavam a dar-me imensos problemas no Windows 7 e acabei por usar o meu portátil que corre XP para fazer o processo todo.
Ola!
Muito obrigado pelo tutorial.
Disseste que usaste a spl ROM v2.53.707.2 (Engineerings SPL v1.33.2010) mas no passo III.6 diz para colocar especificamente a 1.33.2005? o que fizeste nesse passo?
Obrigado
Boas Miguel:
No passo:
III.6 descarreguei e instalei o update.Engineering-SPL-HBOOT-1.33.2005-signed
No passo:
III.1 descarreguei o ROM v2.53.707.2 (Engineerings SPL v1.33.2010)
ola
fiquei com uma duvida, se me pudesses responder agradecia-te mt.
depois de fazer estes procedimentos, fico ja com root access? posso instalar o firmware que quiser?
obrigado pela ajuda que possas dar.
um abraço
Zeli:
Sim. Após os procedimentos o meu magic ficou com root access.